*NOTE: The information below is directed towards installers. Only trained electricians are allowed to install Ferroamp’s products.
Answer:
The startup sequence for a Ferroamp system occurs in the following order:
1. Turn on the AC breaker.
2. Turn on the DC breaker.
3. Press start on the display/EnergyCloud.
The shutdown sequence for a Ferroamp system occurs in the following order:
1. Press stop on the display/EnergyCloud.
2. Turn off the DC breaker.
3. Turn off the AC breaker.
We constantly want to improve the content in the Knowledge Database and would appreciate it if you give feedback on our articles. Does all the information exist, is there anything that needs to be clarified or is there any information that is missing that would help installing or using the Ferroamp system in general? You can give us feedback by choosing if the article was helpful or not in the options below.
If you need to get in contact with Ferroamp's Technical Support or if you have any questions about the system, you can do so by creating a ticket here.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article